Changes

== Current known issues Troubleshooting ==

'''Telescope pointing The table below describes some problems/time server error'''you might encounter. Some can be tackled by the observer (see column 4). If the suggested steps to be followed by an observer fail, please call a technician.

If you encounter telescope {| class="wikitable" border="1"|-! Symptom! Cause! Solution! Who to call|-| The TCS GUI disappears/won't open| The 40inch_lodestar_source_extract service needs to be running on ioserver1.| Check if the process is running, if it is reported as "inactive (dead)" then restart it: ssh io@ioserver1.suthsystemctl status lodestar_source_extractsystemctl start lodestar_source_extract| IT or electronics standby.|-| Telescope pointing problems, check | There may be a time server error.| Check the time and date displayed on the TCS, as the cause could be the time server. If the date/time it is wrongincorrect, please call the electronics technician phone for assistance.| Electronics standby.'''The |-| Dome Shutter obscuring the telescope''' At times, the | The dome does not find its position, and therefore does not follow the telescope correctly. To avoid this, it is always a good idea to point | Point the telescope to Zenith(with dome in auto), or rotate the dome so that it can establish its position by passing through some of the cardinal points.| Observer|}