Changes

SuperWASP (Xami di mura)

1 byte added, 23:03, 19 March 2022
/* First put the telescopes in a safe position */
Try the following steps, in this order, until the telescopes are in a safe position, i.e. approximately horizontal.
* Run the command ''slew stow'' in any terminal window on the TCS machine (computer keyboard/screen nearest the door). The username/password is written on the white board.
* If this command does not work, try the command "''park" '' in any terminal window. * Check that the telescopes are out of the way of the roof. If not, use a 13mm spanner to loosen-off the RA and Dec drive clamps and move the telescopes to a safe position by hand. Remember to tighten (but don't over-tighten) the drive clamps afterwards. There is a tool box on the floor in the mount room.
==== Close the roof ====
22
edits