There is an accompanying SpUpNIC Quick Look GUI, which displays each spectrum after readout. To launch the SpUpNIC Quick Look, click on the emission line icon below the absorption spectrum icon.
==The Graphical Viewinstrument Schematic==
Normal operations are performed in the "Main View" tab of the SpUpNIC Control interface. On the right-hand-side is a graphical representation of the instrument, which shows the light path through the various components controlled by the GUI. You can click on the guide mirror, arc mirror, rear -of -slit mirror and Hartmann shutters to move them in and out of the beam, and on the arc lamps and slit illumination to switch them on and off. A blue border surrounding the graphic indicates that the spectrograph is in "Acquisition" configured for acquisition or "Calibration" modecalibration, i.e. some component is in the beam that would obstruct its path to the science detector. If the system is correctly set up for a science exposure, there will be no coloured frame and the red light-path will go through to the detector.
==Start of run==