Changes

SHOC

550 bytes added, 13:34, 20 March 2015
/* Testing the components */
===Testing the components ===
* Once the machine has booted, fire up a browser and point it at ehttp://shocnawe.gsuth. saao.ac.za:5000/ or http://shocnaweshocndisbelief.suth.saao.ac.za:5000/. * You should be in In the filterwheel tab. :: Check that the filterwheel(s) can be initialized and movedby selecting the initialize button, then selecting a different filter(s) and moving the wheel(s).* Change to In the GPS tab. :: Check that the time is valid, and check (it will read "valid" in green). '' (Note: the time will NOT be valid if the GPS antenna cannot see the sky. The dome must be open for the GPS to see satellites.)'': Check that POP settings can be made. Set a repeated POP signal, at a start time a minute or so in the future. The status should change to pending, and at the chosent chosen time, should change to activated. Switch off the POP signal again.* Change to In the camera tab. :: Check that the camera can be switched on, and (press "turn camera on"): Check that the cooler is working (the temperature should drop): Check that the camera is reading out: confirm the setting is full frame, conventional mode (the default) and press preview. The switch Images should appear every ~ 1.2 sec. Once confirmed that images are coming through, press stop.: Switch the camera off again.
===Technician's Troubleshooting guide ===
214
edits