Changes
SHOC
,* When switched on, the camera starts cooling to its target temperature. The temperature display button is orange while the camera is not yet at the target temperature, and green once it is. If using a non-standard temperature, this may be set using the "Advanced" tab.
* The camera may be used in internal, external or external start modes, selectable using the "Triggering" drop-down.
* While in internal modeor external start trigger modes, the exposure time may be set, and the kinetic cycle time is automatically calculated and displayed. The latter is the period between the start of successive frames in a kinetic series. Arbitrarily short exposre and kinetic cycle times are not possible, due to the time required to read out the image. If you choose an exposure time less than the minimum allowed, the minimum exposure and kinetic cycle times are calculated and automatically displayed.* In external trigger mode, the kinetic cycle time is determined by the frequency of 0the GPS POP signals. However, this frequency should not be higher than than the minimum readout time; this minimum is
