Difference between revisions of "SHOC"

From SAAO TOPS Wiki
Jump to: navigation, search
(Using a web interface to control the instrument)
(Overview)
Line 25: Line 25:
  
 
==== Overview ====
 
==== Overview ====
* Log in as administrator
+
# Log in as administrator
* Stop the service
+
# Stop the service
* Remove the [existing] filterweb service
+
# Remove the [existing] filterweb service
* Re-install the filterweb service
+
# Re-install the filterweb service
* Start the filterweb serivce
+
# Start the filterweb serivce
* Test the GUI
+
# Test the GUI
  
 
<ol>
 
<ol>

Revision as of 15:44, 13 March 2014

Currently there are 2 production, and 1 development computer systems that go with the SHOC instrument. There are 2 working Andor cameras.

The SHOC website may well have more extensive detail about this instrument.

Dr. Marissa Kotze has written some pipeline software which may help with reduction of SHOC data.

Getting Started

  • Access to SHOC via a remote desktop (RDP) session from any host (thin client) or Windows, Mac or Linux
  • From a Mac/Linux terminal, start via rdesktop -g 1200x1000 -u shoc<telescope> (telescope will be 30in, 40in or 74in)
  • Username for the windows SHOC machine will be shoc<telescope>, password available from the resident astronomer
  • Open the Andor SOLIS software and the TM4 GPS software


SHOC Components

The SHOC instrument uses an Andor iXon camera, an Intelligent Reference TM-4 GPS unit, and a host PC which acts as a controller for the instrument. A filter wheel is usually used in conjunction with these. The host PC and GPS are installed in a crate which is mounted beneath the telescope. The filter wheel and camera are mounted beside this, in the light path. The software describing the various components is described below.

Using a web interface to control the instrument

While this system still runs on Windows, there is a mini-webserver that's supplied with flask. We're running this to provide the interface to the filter wheel software (and the GPS software). This will almost certainly change in the future, but for now, it's how it is.

To get the webserver to run as a service [so that every reboot brings the service back up automatically], we're using cygwin. The main challenge is that the COM port seems to change depending on which SHOC system is being used - or perhaps which USB port is used on the system. This results in the service having to be un-installed and re-installed when the COM port changes.

Here are the steps to do the change:

Overview

  1. Log in as administrator
  2. Stop the service
  3. Remove the [existing] filterweb service
  4. Re-install the filterweb service
  5. Start the filterweb serivce
  6. Test the GUI
  1. Stop the service [Note - you MUST be administrator to do ALL the steps expect test the GUI, and can be done from the SAME cygwin terminal window]
    • Open a cygwin terminal session
    • Type
    /cygdrive/c/cygwin/bin/cygrunsrv.exe -E filterweb   [This stops the service]
    
  2. Remove the [existing] filterweb service
    • In the same cygwin terminal from above, type the following:
    /cygdrive/c/cygwin/bin/cygrunsrv.exe -I filterweb
                                         -e 'PYTHONPATH=c:\cygwin\home\Administrator\shoc\instruments\filterwheel\'
                                         -c 'c:\cygwin\home\Administrator\shoc\instruments\filterwheel\'
                                         -p 'c:\Python33\python.exe'
                                         -a 'web\manage.py --serial COM8 runserver -r -d'
                                         -1 /cygdrive/c/var/log/filterweb.log
                                         -2 /cygdrive/c/var/log/filterweb.err
    

    This will install a service called filterweb. Please check the COM port and replace COM8 above with whatever COM port the USB-2-Serial adapter is showing under the System -> Devices in Windows.

Filter Wheel

Filter_wheel_software

GPS Unit

Introduction

The GPS unit is used to provide accurate timing information to the camera. This is sent in the form of precisely times pulses, either one-shot or repeating. The software may be used to check the state of the GPS unit (and hence the quality of the time signals) and to program the start time, frequency and width of the pulses sent to the camera. As with the filter wheel software, the GPS software may be used in stand-alone mode ort as part of an integrated system, such as SHOC.

The GPS software may be accessed through a command line interface (CLI), though most users will prefer to control the GPS through the web-interface provided.

There also exists a version of the GPS software which is suitable for embedding in a scriptable interface.

Command Line Interface

This is the most basic menas of interacting with the GPS unit.

To start the CLI, double-click the gps_cli icon (in Windows), or in a bash shell, type gps_cli.py (Linux).

The CLI may be invoked with a number of options. The -h option presents the user with a list of command line options, and explanations as to their use.

To specify a non-default serial port for the GPS connection, use the --serial <port> command (e.g. --serial /dev/ttyUSB2).

To specify the log level, use --log <level>, where <level> is one of debug, info, warn, critical or error.

To specify the logfile, use --logfile <file>. If this option is not specified, the default is to use gps_cli.log.

From within the CLI, the user is presented with a number of options. The single character options are:

h - Display the list of options s - View the current GPS status q - Exit the program

There are then a number of options, of the form set <option>, which allow the user to set mask angle, user time bias, the timing mode used by the GPS, the location, and the programmable output pulse (POP).

Finally, there are get options of the form get <option>, allowing the user to get the mask angle, user time bias, timing mode, geometric quality, timing status, oscillator tuning mode, alarm states, satellite information, and POP settings.

The programmable output pulse is the primary use of the GPS unit. The user may choose:

  • a one-shot pulse, at a specified time and with a specified width, or
  • a repeating pulse, starting at a specified time, with a specified interval and pulse width.

The date for the POP should be entered in the format MMDDYYYY, and the time in the format HHMMSS.SSSSSSS (the fractional time part may be specified to seven decimal places, although it's hard to imagine suuch accuracy being required!) Specifying a date/time combination in the past gives an error and does not change the POP settings on the unit. Also note that the GPS unit uses UTC, so the time specified should be in UTC.

Web Interface

The web interface is the primary means of interacting with the GPS unit. As with the filterwheel software, the control software and web server are started as a service (on Windows) or a daemon (on Unix) and the user should not need to start these. The web server provides a means of viewing the GPS status, and setting the Programmable Output Pulse (POP) parameters.

Pressing the "Receiver Status" button brings up a display of the status and signal strength for each of the twelve channels available.

The other indicators display:

  • the timing status of the GPS (whether it is able to determine a valid time from the satellites in view),
  • the oscillator status (whether the onboard oscillator has already reached minimum accuracy levels, and
  • antenna alarm status (whether all antenna circuits are operating normally.

When setting the POP, the description for the input parameters in the CLI holds, but note that the web interface requires the input time to be in localtime (which is then converted to UTC before being sent to the GPS unit).

Once set, the POP indicator status changes to yellow (one-shot POP) or orange (repeating POP), indicating a pending pulse. Once the start time is reached the indicator status changes back to green (if the timing status is still valid), or red (if the timing status is not valid). If, while a repeating POP is active, the timing status becomes invalid, the indicator also becomes red. In either case, if the indicator status becomes red, the POP will need to be cancelled or reset.

A scheduled, running or failed pulse may be cancelled with the "Cancel" button, or the "Off" mode may be chosen (and saved).

Diagnostic Interface

As with the filter wheel, the diagnostic interface is invoked by starting the command line interface, using the --diagnostic_mode flag. It automatically sets logging to the most verbose level, and provides greater details on the data strings sent to and received from the GPS.

There is also the ability to set various parameters which are not normally accessible in the CLI or web-based interface. These include the mask angle, user time bias, the timing mode used by the GPS, and the exact latitude, longitude and altitude.

Scriptable interface

To enable the GPS to be configured as part of a complex workflow, there is also a scriptable interface. This is similar to the scriptable interface presented by the filter wheel software.