Difference between revisions of "New 1.0m"

From SAAO TOPS Wiki
Jump to: navigation, search
(Running AG Lodestars through rts2)
(Running AG Lodestars through rts2)
Line 8: Line 8:
  
 
=== Running SHOC through rts2 ===
 
=== Running SHOC through rts2 ===
 +
 +
 +
# sadfds
 +
# asdfsd
 +
  
  
 
=== Running AG Lodestars through rts2 ===
 
=== Running AG Lodestars through rts2 ===
  
#1 Check whether Lodestar is connected:
+
# Check whether Lodestar is connected:
 
ssh pi@1mag1.suth.saao.ac.za (or pimag2 for DER2)
 
ssh pi@1mag1.suth.saao.ac.za (or pimag2 for DER2)
 
lsusb
 
lsusb
 
Look for "Starlight Xpress Lodestar autoguider" in output
 
Look for "Starlight Xpress Lodestar autoguider" in output
  
#2 Start rts2 control of Lodestar on the pi:
+
# Start rts2 control of Lodestar on the pi:
 
ssh pi@1mag1.suth.saao.ac.za
 
ssh pi@1mag1.suth.saao.ac.za
 
sudo bash
 
sudo bash

Revision as of 21:51, 21 October 2016

The "new" 1-m telescope was installed in the dome that previously housed a 30-inch telescope. The telescope was built by APM Telescopes[1] and was lifted into the dome on 02 August 2016. Commissioning is currently underway.

The 30-inch telescope was donated to the University of Kwa-Zulu Natal.

Watch this space!

Commissioning Aids

Running SHOC through rts2

  1. sadfds
  2. asdfsd


Running AG Lodestars through rts2

  1. Check whether Lodestar is connected:

ssh pi@1mag1.suth.saao.ac.za (or pimag2 for DER2) lsusb Look for "Starlight Xpress Lodestar autoguider" in output

  1. Start rts2 control of Lodestar on the pi:

ssh pi@1mag1.suth.saao.ac.za sudo bash /etc/init.d/rts2 start

  1. Take images with the Lodestar:

ssh -X observer@1ms1.suth.saao.ac.za rts2-xfocusc -d AG1CCD -e 1 (where AG1CCD is on DER1 and -e is the exposure time option).

  1. Take and save an image with the Lodestar:

CTRL-C out of rts2-xfocusc rts2-scriptexec -d AG1CCD -s 'E 1'

  1. Loop multiple saved images:

rts2-scriptexec -d AG1CCD -s 'for 5 {E 1}' (also rts2-xfocusc --save)