It should not ordinarily be necessary for an observer to perform these procedures. However, if a restart is necessary, or if recovering from an unplanned shutdown:
*The Mookodi host machine is set to boot automatically when powered.
*There are three services that need to be run before Mookodi can be operated via the web GUI: opto-mechanics, camera, and web server. Each should be run in a separate screen session, otherwise they will shutdown when you close your ssh session.*The opto-mechanics and camera servers need to be started before the web server. ssh mookodi@mookodi.suth.saao.ac.za ./run_camera_server.sh ./run_optomechanics_server.sh ./run_web_server.sh*The web GUI can now be accessed at [http://mookodi.suth.saao.ac.za:5000 mookodi.suth.saao.ac.za:5000]
If there is an issue starting the web server, Mookodi can be operated via a command line interface. With the camera and optomechanics servers running, follow the [[#Operation via the command line interface (CLI)|instructions for CLI operation]].TODO
== Daily Rounds ==