Changes
/* Troubleshooting */
The blue metallic box below the acquisition/guider box contains the filter wheel(s), labelled on the East and West sides. Each wheel has 8 filter positions; position 1 is the reference and position 8 is always empty, so that with two wheels installed, one wheel should always have position 8 in the beam (unless one wheel contains neutral density filters). '''Filters must not be removed from the filter wheels.'''
Throughout 20222023, the filters in the 1-m wheels will be as follows:
{| class="wikitable" border="1"
10. '''Open the mirror covers''' by clicking the "DOME" pulldown menu and selecting "Mirror OPEN". The mirror indicator on the top right will turn green.
11. Switch '''dome to AUTO''' by clicking the red "MAN" button (top right of display). It will turn green. At times, it is necessary to either rotate the dome or point the telescope to Zenith so that the dome is able to locate its poisition and avoid the possibility of the dome not correctly following the telescope .
12. Turn '''telescope tracking on''' by clicking the red "Tracking is OFF" button. It will turn green.
If the TCS-web is not responding to any inputs, then make sure that the WebUser has Control button is clicked and shows green.
To access the TCS from the web broweserbrowser, click here [http://remoteops1desk.suth.saao.ac.za:5001/ TCS-Web].
[[File:WebUser-Control.jpeg|600px|frameless]]
=== STE3/STE4 ===
1. Follow the start-up procedure described in Sections 1 and 2 of the [https://wwwcloudcape.saao.ac.za/wp-contentindex.php/uploadss/sites/5/SAAOCCDmanual.pdf9QgG2QpI3GSnoO8|SAAO CCD Camera Control Program, version 1.2", by J. W. Menzies].
'''Important:''' Ensure that the following are correct in the blue "Details of Run" startup panel:
* Remarks: Any applicable notes, e.g. the RA & Dec zeropoints for the specific coordinates used.
== Current known issues Troubleshooting ==
==Webcam==