Changes
/* STE3/STE4: CCD Camera log book */
* CCD Type: This will be STE3 if the unbinned detector dimensions are 512x512 pixels, else STE4 for 1024x1024.
* CCD temp: This refers to the ``"Cu Block'' " temperature reported in the ``"Temperature'' " section of the instrument status panel of the STE3/4 CCD Camera Control software.
* Filters: Enter the filter in each position of the two wheels.
* Date and Observers: are self-explanatory.
* Run number: This is a 3-digit number that will apply to your data for the duration of your observing run (unlike the UCT~CCD convention). It will be prefixed to your image files, which will be named annnxxxx.fits, where nnn is the run number, xxxx is the file number. To determine your run number, check the previous run number in the log book and add 1.
* File No. is the number of the image (xxxx where the filename is annnxxxx).
* Filter and Seeing: are self-explanatory.
* Guide star X Y: these are the XY-slide coordinates of the guide star used for each observation. Read them from the TCS ``"XY Slides Control'' " window while guiding, as they are not necessarily identical to the values you read from DS9.
* Remarks: Any applicable notes, e.g. the RA \& Dec zeropoints for the specific coordinates used.
== Current known issues ==
