Changes
/* Start-up recipe */
2. Check the observing floor and '''clear any obstacles''' (e.g. ladders) that may obstruct the telescope.
3. Check that '''Telescope Power ControlSwitch off the [[#Light switches|lights]]''' (on the wall just inside everywhere except in the front door) is set to PLCwarm room.
4. Check that '''Switch off the [[#Light switches|lights]]Telescope Power Control''' everywhere except in (on the wall just inside the warm roomfront door) is set to PLC.
In the warm room, '''on the wall-mounted mimic panel''' at the left-hand end of the desk:
