Last modified on 27 February 2024, at 17:57

SHOCnWonder

Revision as of 17:57, 27 February 2024 by Nerasmus (Talk | contribs) (Running scripts)

Introduction

This page contains additional information for the "new SHOC" aka "shocnwonder" that is now permanently mounted on the 74-inch as a secondary instrument via the 74-inch "Instrument Selector" so user should first familiarise themselves with the "Instrument Selector" wiki: wiki-link.

All the hardware for the new SHOC system is new but the underlying control software, GUI, service startup instructions, and data-folder structures etc. are identical to the old SHOC systems so user should also first familiarise themselves with the old SHOC wiki if they are not already regular SHOC users: wiki-link.

Specifications

  • Camera: Andor iXon 888 #BV USB3 , 1024 × 1024px CCD, 13 μm pixels (CCD performance test sheet)
  • Plate scale: 0.16 arcsec/px
  • Field of view: 2.7' × 2.7' (the new system also has a focal reducer so the FoV-width is roughy double that of the old system)
  • Filters:
    Filter Slide A: U,B,V,R,I
    Filter Slide B: Currently unpopulated but eventually will have u', g', r', i', z'

GUI and login details

GUI url (onsite or via VPN access only): http://shocnwonder.suth.saao.ac.za:5000/ OR http://shoc74in.suth.saao.ac.za:5000/

username: shoc74in

password: the regular "shoc74in" user password

Data access

There is an automated log being generated as files appear on disk by scraping the fits headers:

https://www.saao.ac.za/~sbp/74in_SHW_ObsLogs/

As with the old SHOC systems, data can be copied as follow:

    • Open a shell on your local PC (Putty if you're using Windows or a bash/tcsh/sh if on Mac or Linux)
    • Copy the data using the following command:
       rsync -avzP shoc74in@shoc74in.suth.saao.ac.za:"/data/74in/shw/<YYYY>/<MMDD>/*.fits" /LocalFilePath

-> the password is that for the "shoc74in" account

  • NOTE 1: if the rsync command fails, try it WITHOUT the wildcard (*) and specify a specific file. Some rsync programs apparently do not support this function.
  • NOTE 2: data is also backed-up at the end of the night and on a daily basis to the "astro2015" servers so data can also be accessed with the same folder structure from there.

Running scripts

For users that wish to run scripts (e.g., continuously take exposures while cycling a filter sequence), we do not support the old buggy scripting method via the GUI anymore. In fact, on the new system it doesn't work at all so don't even try.

We have developed a new much more stable command line method to run scripts. The instructions are as follow:

  • Make sure the SHOC camera is ON and initialised (i.e., you have opened the SHOC webgui and hit the "Turn Camera On" button)
  • Setup the camera to your desired readout mode, binning and gain settings (set triggering to "Internal" and kinetic series to "1")
  • ssh to the "shoc box" as the "shoc74in" user (password is the regular "shoc74in" user’s password)


       ssh shoc74in@shoc74in.suth.saao.ac.za

-> the password is that for the "shoc74in" account

  • Navigate to the scripting folder


       cd /home/ccd/development/shoc-scripting/

A comparison between OLD vs. NEW system

Compariing raw unreduced images taken of the same field (07:13:27.974 -15:21:04.21) with similar camera settings for the NEW (left) and OLD (right) SHOC system on the 74-inch.