Changes
/* Troubleshooting */
| The browser TCS won't load or is unresponsive.
| (i) The page might need refreshing. (ii) One or more of the SiTech GUIs may not be running. (iii) The web server may need restarting.
| (i) Reload the page. (ii) Check that all SiTech GUIs are running and have no comms problems; restart all GUIs if there are any issues. (iii) Restart the lesedi server and web server by logging into observer@1ms1lesedis2.suth.saao.ac.za and running the commands <code>sudo systemctl restart lesedi</code> and <code>sudo systemctl restart lesedi-web</code>, then reload the browser. If any of the SiTech software is restarted, you must also do (iii).
| (ii) Hannah, IT or electronic standby.
|-
| The autoguider GUI crashes.
| (i) One or more of the SiTech GUIs may not be running or may have comms issues. (ii) The Icron device connected to the Lodestar cameras might need rebooting.
| (i) Check that all SiTech GUIs are running and have no comms problems; restart all GUIs if there are any issues. (ii) Unplug the power cable from the Lodestar Icron device mounted on the underside of the pier, then plug it in again. If the problem persists, unplug the Lodestar Icron device from 1ms1 lesedis2 downstairs in the server room. N.B. there are separate Icron devices for the Lodestar cameras and the SiTech controllers - be sure to check the labels and get the right ones.
| (i) Hannah, IT or Electronic standby. (ii) Electronic or IT standby if on site, otherwise mechanical standby can fix this.
|-
* Log into SHOC as shoc1m at http://shoc1m.suth.saao.ac.za:5000 and switch camera on
* If in the dome, log into the NUC as ccd <br />
* Open a terminal and ssh -X observer@1ms1lesedis2.suth.saao.ac.za <br />
* rts2-mon <br />
* In CUP menu, check that manual=false. If not, manually switch off dome lockout on observing floor <br />
sudo bash<br />
cd /home/petr/rts2/src/camd<br />
sudo killall CameraServer && sudo ./rts2-camd-andor --server 1ms1lesedis2.suth.saao.ac.za <br />
* Take images with SHOC:<br />
ssh -X observer@1ms1lesedis2.suth.saao.ac.za <br />
rts2-xfocusc -d C0 -e 1<br />
(where -e is the exposure time option. Add "-X 1" to overlay grid lines).<br />
/etc/init.d/rts2 start<br />
* Take images with the Lodestar:<br />
ssh -X observer@1ms1lesedis2.suth.saao.ac.za <br />
rts2-xfocusc -d AG1CCD -e 1<br />
(where AG1CCD is on DER1 and -e is the exposure time option).<br />
