Changes
/* Operation via the web GUI */
# '''Opto-Mechanic Configuration:'''
#* Select the desired configuration for each component. The components moved in/out of the beam via pneumatics (eg. mirrors, slit, grism) and lamps will respond on the push of the button, and indicate when they are busy or in the desired configuration. '''To conserve lamp lifetime, don't do not leave them on unneccessary for extended periods of time.'''
#* Select the required filter via the dropdown menu under the Filter A or Filter B headings and press the SET button to activate the filter slides. The box above the dropdown indicates the name of the filter in position for each slide, or BUSY if the slide is still finding its requested position.
# '''Target Acquisition:''' TO DO
#*'''Exposure time (in ms):''' Note the exposure time display does not update when the SET button is pushed, it only updates after the exposure is started. This is a [[#Known Issues|known issue]].
#'''Camera Control:'''<br /> This contains an image display of the last completed exposure, using [https://js9.si.edu/ JS9].
#**'''Take exposure/Start:''' Starts an exposure with the SET exposure configuration#**'''Abort:''' Aborts the current exposure. #**'''CCD Temperature:''' Displays the current CCD temperature, and buttons for cooling down and warming up. The camera takes 10 - 15 minutes to cool, and will stabilise at approximately -70 ºC. Cool the camera at the start of observations and warm it up once you are done.
''Note: It is advisable that DARK frames should be taken with the shutter in the "ALWAYS CLOSED" mode. BIAS frames (especially if multiple frames are taken) SHOULD ALWAYS be taken with the shutter in the "ALWAYS CLOSED" mode since this will deactivate the iris-shutter in the closed state and prolong the lifetime, see also [[#Suitable_Uses|high cadence imaging]] in the Suitable uses section at the top of this page.
