The pink warning box will disappear from the relevant GUI if the problem is resolved. If the problem persists, see point 3 below.
3. The most common issue is '''loss of dome comms'''. There is If clicking on a watchdog on the dome that causes it to close after five minutes of bad "Bad comms - sometimes the " warning message button does not appear before fix the dome automatically closes. This problem isn't usually solved using , the fix above and ServoSCommunicator SiTech software will need to be stopped and restarted. +It is vital that all the SiTech GUIs are closed, and that they are reopened in the correct order, so follow [[#Starting SiTech software| this procedure.]]
34. The most common issue is '''loss of dome comms'''. If clicking on There is a "Bad watchdog on the dome that causes it to close after five minutes of bad comms" - sometimes the warning button message does not fix appear before the problemdome automatically closes. After following step 2 (then step 3 if step 2 doesn't help), take control of the dome (click "Remote Control" in the SiTech software will need to be stopped Dome GUI, or "Take Control" on the browser TCS Advanced tab), and restarted. It make sure the dome is vital that all open and tracking the telescope ("Follow scope" on SiTech GUIs are closed, and that they are reopened in or "Tracking" ON on the correct order, so follow this procedurebrowser TCS Advanced tab).