===Focusing the acquisition camera===
On the SpUpNIC GUI:* With Having focused the guide mirror out of the beam (either set the ''Science'' state in the ''Lamp/Mirror Settings'' pane of the SpUpNIC Control GUI -- if it says Guide Mirror ''Acquisition''telescope as described above, click ''Change'' -- or click on the guide mirror in the instrument schematic one needs to allow focus the beam through the hole in the guide mirror.acquisition camera* Turn on The star used to focus the slit illuminationtelescope may be too bright, either by clicking on the ''Slit illumination'' icon in the schematic, or by clicking ''Change'' in the ''Instrument Setup'' paneso aim for something fainter (e.On the TCS:* Start exposures with the acquisition camera and tune the g. a guide star that needs a ~1 sec exposure time/LUT sliders/slit illumination to allow good contrast of the scratches on the lower slit jaw.)* Adjust the acquisition camera focus with the up/down buttons in the bottom lower right ''Camera Focus'' box until corner of the scratches on TCS GUI to get the slit jaw appear stars as sharp as you can get them.possible
== User's Troubleshooting Guide ==