Lesedi Project Wiki

This wiki is for construction of a spectrograph on the 1-m Lesedi telescope in Sutherland. We anticipate future wikis for the user manual and for technical support.
The SAAO and LJMU (Liverpool John Moores University) are collaborating on the project.
The instrument is based on SPRAT (Spectrograph for Rapid Acquisition of Transients), which is currently operating robotically on the 2-m Liverpool Telescope on La Palma.

Project Team

Instrument PI: Iain Steele (LJMU)

Instrument Scientists: Helen Jermak / Andrjez Piascik (LJMU)

Mechanical Engineer: Stuart Bates (LJMU)

Software Engineer: Chris Mottram (LJMU)

Data Pipeline: Marco Lam (LJMU)

Local Co-PIs: Amanda Sickafoose & Hannah Worters

Local Electronics Engineer: Hitesh Gajjar

Local Mechanical Engineesr:James O'Connor and Egan Loubser

Local Software Engineer: Carel van Gend

The link to the 2017 October 27 Skype kick-off presentation: https://www.dropbox.com/s/lcr54nkvtusdh69/SAAO-SPRAT-KICKOFF.pptx?dl=0 (includes references to the SPIE paper and Zej's thesis)

(1) Hannah to send Iain telescope optical prescription (done).
(2) Consideration of mounting, in terms of peripherals and control equipment — basically starting to think about packaging and how much needs to be mounted on the port vs. off to the sides, note that control of moving parts will be pneumatic (James/Egan).
(3) Question of which coating to buy for the Andor iDus camera -- new option has higher QE over wider range, but higher dark current (Amanda & Hannah)
(4) Question of whether we want two optimized wavelength settings, like SPRAT, or only one — the former aren’t being well used on SPRAT and the latter saves a moving part. although they say that they have plans to ensure that part is more reliable than the current version (Amanda & Hannah)
(5) Think about optimal slit size — 1.5” min, could be up to 2”, could also consider stepped slit — these are laser cut, and we could request more than one (Amanda & Hannah)
(6) Thinking about .fits header information for compatibility with data reduction pipeline, and how to integrate TCS with instrument to allow automated acquisition (Carel)

Combined Sprat/SHOC is way to go.

Working out from Nasmyth:

"Inside" Nasymyth is autoguider. This can patrol half of the field of view, and will hopefully have a focus mechanism.
Nasmyth mounting plate will have:
- James to provide details of this mounting as used on Wide Field Camera on opposite port.
- 1/4 of the field of view will be for a High Resolution Spectrograph (HRS) fibre feed
- 1/4 of the field of view with be for SPRAT/SHOC
- A cable wrap (copy of that on opposite port) will be provided. James to provide details.
- There is possibility of pneumatic supply
Deployable calibration mirror (to feed flat/arc)
Deployable slit
Field Lens
Collimator Lens
FILTER SLIDES (3). Hopefully <50mm thickness. To house maybe 5 filters each. Note one filter will need to be order blocker (4000-8000 Angstroms) for SPRAT. James to design to fit to an interface in SPRAT.
Grism Assembly
Camera Lens and CCD.

General Design Points

Filter slides need to be in collimated beam to avoid focus shifts
Try and minimise cables on/off mount. So mount control computer with instrument. Note SHOC software requires GPS feed (serial?).
USB for camera rather than PCI Card
Use existing SHOC CCD readout (via andor SDK)
Use existing Apache Thrift infrastructure
LJMU responsible for all mechanism control, including filter slides
Use wiki to keep one version of documentation/files etc.

Actions:

IAS: Check/modify optical design to make space for filter slides
James: Provide details of mounting plate/wider field camera (STEP File)
Carel: Provide details of SHOC software to Chris Mottram so he can try and built a local copy at LJMU
Amanda: Look at trade off between deep depletion (higher red QE, higher dark current) and standard EMCCD

Point was raised that (rather than comount SHOC and this new spectrograph) we could use an iXon camera in the SPRAT system, add filter wheels, and effectively use it as SHOC when the slit, grating, and prisms are out of beam. The iXon has 1024 x 13-micron pixels as opposed to the iDus 1024 x 26-micron pixels. A test was performed at LT in the week of 15 Dec., in which the 85 mm f/1.8 camera lens was swapped out with a 50 mm Nikon f/1.4. The result from an arc was 7.70 Å/channel, central wavelength 6009.04 Å, range 4073.64 – 8018.33 Å. This range could be tweaked by tilting the camera slightly.

Some more details 50mmLensTest