Changes
SHOC
,/* Testing the components */
* In the GPS tab:
: Check that the time is valid (it will read "valid" in green). '' (Note: the time will NOT be valid if the GPS antenna cannot see the sky. The dome must be open for the GPS to see satellites.)''
: Check that POP settings can be made. Set a repeated POP signal, at a :: Mode to repeat.:: pulse width should 10 microseconds (default):: start date should be set or selected to be today's date.:: start time a minute should be set to some seconds or so a min in the future. , localtime:: repeat interval can be your choice: this is just a test value, something like a few hundred millisec is appropriate:: click the apply button:: The status should change to pending, and at the chosen time, should change to activated. Switch '''make sure to switch off the POP signal againby clicking stop. "
* In the camera tab:
: Check that the camera can be switched on (press "turn camera on")
