Changes
/* Autoguiding */
Extension number: 9109 (to phone from within the observatory)
<!--To phone the dome from outside: 023 100 0 0230 (+27 23 100 0 0230 from outside South Africa)
-->
10.2.2.32:5001
'''Make sure that there is only ever one autoguider window open at a timeon any PC, or you will have problems.'''
The autoguider control interface looks like this:
# On the Controls tab of the TCS check for grey or orange indicators showing the status of each subsystem: telescope Tracking = Off (grey); Mirror covers = Closed (orange); Dome (orange) Tracking = Off (grey) and Shutters = Closed (orange) [the arc indicating the shutters on the schematic will also turn red].
# If any of the above is not in the correct state, you can rectify it using the relevant buttons on the Advanced tab.
# '''Logout''' of the TCS and close the webcam browser windowswindow.# Stop the autoguider exposures and , initialise the XY slidesand close the autoguider browser window.# Close the webcam browser windows.
# Make sure the instrument (Mookodi or Sibonise) is not exposing and follow the relevant instrument shutdown procedure.
== Troubleshooting ==
The table below describes some problems you might encounter. Some can be tackled by the observer (see column 4). If the suggested steps to be followed by an observer fail, please call a technician.
{| class="wikitable" border="1"
| Mechanical or electronic standby.
|-
| The telescope spontaneously shut down (mirror covers closed, dome closed, telescope parked).| The facility was shutdown by the LCU, either due to bad weather or a loss of connection to the TCS.| Check the weather: if it's bad you must leave the telescope closed. Check the TCS: if there is a message stating that the connection has been lost, reload the page. If the weather is good, press Startup and resume observing.| Observer|-| The dome didn't open on startup, or closed by itself and won't reopen.
| There may be a dome comms problem.
| Call a technician to remedy.
